- Title
- Direct observation of pH-induced coalescence of latex-stabilized bubbles using high-speed video imaging
- Creator
- Ata, Seher; Davis, Elizabeth S.; Dupin, Damien; Armes, Steven P.; Wanless, Erica J.
- Relation
- Langmuir Vol. 26, Issue 11, p. 7865-7874
- Publisher Link
- http://dx.doi.org/10.1021/la904708x
- Publisher
- American Chemical Society
- Resource Type
- journal article
- Date
- 2010
- Description
- The coalescence of pairs of 2 mm air bubbles grown in a dilute electrolyte solution containing a lightly cross-linked 380 nm diameter PEGMA-stabilized poly(2-vinylpyridine) (P2VP) latex was monitored using a high-speed video camera. The air bubbles were highly stable at pH 10 when coated with this latex, although coalescence could be induced by increasing the bubble volume when in contact. Conversely, coalescence was rapid when the bubbles were equilibrated at pH 2, since the latex undergoes a latex-to-microgel transition and the swollen microgel particles are no longer adsorbed at the air−water interface. Rapid coalescence was also observed for latex-coated bubbles equilibrated at pH 10 and then abruptly adjusted to pH 2. Time-dependent postrupture oscillations in the projected surface area of coalescing P2VP-coated bubble pairs were studied using a high-speed video camera in order to reinvestigate the rapid acid-induced catastrophic foam collapse previously reported [Dupin, D.; et al. J. Mater. Chem. 2008, 18, 545]. At pH 10, the P2VP latex particles adsorbed at the surface of coalescing bubbles reduce the oscillation frequency significantly. This is attributed to a close-packed latex monolayer, which increases the bubble stiffness and hence restricts surface deformation. The swollen P2VP microgel particles that are formed in acid also affected the coalescence dynamics. It was concluded that there was a high concentration of swollen microgel at the air−water interface, which created a localized, viscous surface gel layer that inhibited at least the first period of the surface area oscillation. Close comparison between latex-coated bubbles at pH 10 and those coated with 66 μm spherical glass beads indicated that the former system exhibits more elastic behavior. This was attributed to the compressibility of the latex monolayer on the bubble surface during coalescence. A comparable elastic response was observed for similar sized titania particles, suggesting that particle size is a significant factor in defining the interfacial elasticity of particle-coated bubbles
- Subject
- coalescence; pH; bubbles; high-speed video; acid
- Identifier
- http://hdl.handle.net/1959.13/926675
- Identifier
- uon:9908
- Identifier
- ISSN:0743-7463
- Language
- eng
- Reviewed
- Hits: 2730
- Visitors: 2966
- Downloads: 0
Thumbnail | File | Description | Size | Format |
---|